PEMK-1 is a generous purpose marking-solidification-inspection equipment (Model type: Stamping machine); it integrates the function of marking, solidification and inspection together, very suitable for the products marking, which have special specifications, large tolerance of size, or significant difference of outline, standardization and automation difficulty.
This equipment has been professionally designed, it could achieve the effectiveness of fast marking operation, reliable marking quality for those components, which surface is not flat, and size error are large.
The left side movie describes “Plastic Film Capacitor” as an example for demonstrating the marking process of product.
The general purpose marking-solidification-inspection equipment, PEMK-1, its platform plan uses matrix design, including feed-in, marking, solidification, taking, and conveyor with stepped-displacement inspection, all are open design, the operation is easy.
Regarding about safety, this equipment is designed to multiple protection mechanism, which could prevent occurrence of any unexpected situations.
This equipment could achieve the target of small batch, multi-specification, and high productivity; it is high-degree automation, low cost and high flexibility production equipment.
A design of “Adjustable-orientation fixture” could transfer many kinds of clamp specification, its orientation is easy, and specification replacement is fast.
The mechanism of marking head set an “Error adjustment device”, it can absorb compensation automatically even the height error value of product is 2mm. For the products, which have large size error, standardization difficulty, “Error adjustment device” could keep consistent pressure in marking, printing out products with fine appearance and consistent marking quality.
Clamp mechanism is controlled by air pressure, its pressure is constant, and could clamp different object automatically.
．
Batch is small, types are multiple, and productivity is high.
．
Changing specification quickly and easily, it only spend about 10~15minutes for one person.
．
It is very attractive to the product, which is not easy for standardization (The height difference of product is within 2mm, it will absorb compensation automatically).
．
Mechanism configuration is open, operation is good, it matches ergonomics.
．
Control function is complete, operation is easy, higher safety.
Model No.
PEMK-1
Power Supply
1φ, AC 220 V , 50 / 60 Hz , 40A
Dimension
( L x W x H )
125 × 190 × 170 cm
Ink
UV Ink
Applicable scope of product outlook
The product size within 100 × 60 × 35mm are all acceptable
Marking Range
33 × 30 mm
Machine capacity
Max. 25 pcs / m
Air Pressure
4 ~ 6 kg / c㎡
It is applied to plastic film capacitor, most of electronic components, parts.
