FDMIC-1 is tube (bore) stamping machine (Model type: Stamping machine), it is applied to the inner wall stamping of tubular element. Because there are seldom marking machines can access element’s bore stamping, Yulishih Industrial Co. utilizing the principle of Fast-dry type marking machine, especially develops Tubular Inner Stamping Machine for customer requirement (it is the extended model of Fast-dry type marking machine, FDMK-1).
Tubular inner stamping machine, FDMIC-1, its major features including desktop, small volume, easy operation and complete function; The ink container and marking head all use the design of fast assembly-disassembly and orientation, which could quickly change different stamping contain.
Tubular inner stamping machine, FDMIC-1, its fixture is set a Swing-Angle device, which could be adjusted according to the taper of conical tubular-material, and enlarging application range of products.
Tubular inner stamping machine, FDMIC-1, it is majorly applied to the marking of products, which have exquisite appearance and can’t be marked on appearance, for example, microphone, etc., marking notes, text on the inside of products, won’t affect the beauty of products and keeping the value of products.
．
Could mark on many kinds of material surface: metal, plastic, glass, baking finish, plating, ceramic, paper, rubber, leather.
．
Providing 7 colors of ink: black, white, yellow, blue, and green, violet, red, those also completely match the specification of MSDS.
．
Ink: Good adhesion, rub-resistance, it is not easy to fall off, the drying speed is fast (It could dry naturally within 20s), heat-resistance is 390 ℃.
．
IAlphabet mold uses special material, its hardness is moderate, has characteristic that could endure long term contact from ink and won’t deteriorate, and operation life is long.
．
The minimum marking height is 1.2mm (Yulishih Industrial Co. has complete consumables supply system).
．
The platform attaches additional counter.
Model No.
FDMIC-1
Power Supply
1φ , AC 110V / 220V , 50 / 60 Hz
Dimension
( L x W x H )
500 x 300 x 220 mm
Ink
Fast-drying Ink
The Minimum Marking Height
Height 1.2 mm
The Minimum Marking Size
φ15 mm
Marking Speed
20 ~ 25 cycles / m
Weight of Platform
20 kg
Air Pressure
4.0 kg / c㎡ ( Minimum )
Tubular inner stamping machine, FDMIC-1, it is majorly applied to the marking of products, which have exquisite appearance and can’t be marked on appearance, for example, microphone, etc., marking notes, text on the inside of products, won’t affect the beauty of products and keeping the value of products.
